| WP740 |
Take care of adjacent crops, since damage is possible. |
– |
– |
| WP734 |
Damage is possible to the crop. |
– |
– |
| WP713 |
Damage is possible to replanted dicotyledonous crops. |
– |
– |
| WH9161 |
The instructions for use must include a summary of weeds which can be controlled well, less well and insufficiently by the product, as well as a list of species and/or varieties showing which crops are tolerant of the intended application rate and which are not. |
– |
– |
| WP744 |
Damage possible to adjacent woody plants. |
– |
– |
| NW701 |
Between treated areas which have an incline of more than 2 % and surface waters - including periodically but excluding occasionally water-bearing surface waters - there must be a buffer zone under complete plant cover. The buffer zone's protective function must not be impaired by the use of implements. It must be at least 10 m wide. This buffer zone is not necessary if: -sufficient catching systems are available for the water and soil transported by run-off, which do not flow into surface water or are not connected with the urban drainage system or -the product is used for conservation or no-tillage methods. |
– |
– |
| NW607-2 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water bearing surface waters - the product must be applied with equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended. Depending on the drift reduction classes for the equipment stated below, the following buffer zones must be kept from surface waters. In addition to the minimum buffer zone from surface waters stipulated by state law, the ban on application in or in the immediate vicinity of waters must be observed at all times for drift reduction classes marked with "*". Violations may be punished by fines of up to 50 000 EUR. |
– |
– |
| NT108-1 |
A buffer zone of at least 5 m must be kept from adjacent areas (except agriculturally or horticulturally used areas, roads, paths and public places). In addition, in an adjoining strip of at least 20 m, the product must be applied using loss reducing equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended, and be registered in at least drift reducing class 75 %. Neither loss reducing equipment nor a buffer zone of at least 5 m are required if the product is applied with portable plant protection equipment or if adjacent areas (field boundaries, hedges, groups of woody plants) are less than 3 m wide. A buffer zone of at least 5 m is also unnecessary if the product is applied in an area which has been declared by the Biologische Bundesanstalt in the "Index of regional proportions of ecotones" of 7 February 2002 (Federal Gazette no. 70 a of 13 April 2002), as amended, as agrarian landscape with a sufficient proportion of natural and semi-natural structures, or if evidence can be shown that adjacent areas (e.g. field boundaries, hedges, groups of woody plants) were planted on agriculturally or horticulturally used areas.
|
– |
– |
