| NW642-1 |
The product may not be applied in or in the immediate vicinity of surface or coastal waters. Irrespective of this, the minimum buffer zone from surface waters stipulated by state law must be observed. Violations may be punished by fines of up to 50 000 EUR. |
– |
– |
| WH9142 |
The instructions for use must include a summary of weeds, which can be controlled well, less well and insufficiently by the product. |
– |
– |
| NG402 |
Between treated areas with an incline of more than 2% and surface water - except only occasionally but including periodically water-bearing surface water - there must be a border under complete plant cover. The border's protective function must not be impaired by the use of implements. It must be at least 10 m wide. This border is not necessary if: - sufficient catching systems are available for the water and soil transported by run-off, which do not flow into surface water or are not connected with the urban drainage system or - the product is used for mulch or direct drilling methods. |
– |
– |
| NT140 |
Application of the product with a water application rate of less than 150 l/ha has to be conduct-ed with a field sprayer that is listed with a drift reduction class of at least 50 % in the list of "loss-reducing devices" in the first announcement on the entry of tested device types in the descrip-tive list pursuant to Section 52 (2) of the Plant Protection Act of September 10, 2013 (BAnz AT 23.10.2013 B4), as amended. The conditions of use for application with a drift reduction of at least 50 % must be complied over the entire area to be treated. |
– |
– |
