| VA263-1 |
No outdoor use of the of the plant protection product with handheld equipment. |
– |
– |
| SF275-21RA |
During the first 21 days after application in lawns, it must be ensured that long-sleeved working clothes and sturdy footwear are worn during successive work/inspections with direct contact with the treated crops/areas. |
– |
– |
| SF252 |
The public must be informed in a suitable manner about the use of plant protection products (e.g. by putting up warning notices on-site during and at least up to 48 h after application). |
– |
– |
| SF251 |
It must be ensured that no uninvolved persons are present right next to or on the area to be treated during treatment and until the spray deposit has dried. |
– |
– |
| NW802 |
Not to be used on functional surfaces with artificial topsoil strata and with a drainage system which is close to the surface (e.g. on sports grounds, greens and tee boxes on golf courses) unless run-off drainage and surface water is discharged into catching systems which have sufficient capacity, and not directly into water bodies. |
– |
– |
| NW606 |
The only case in which the product may be applied without loss reducing equipment is when at least the buffer zone stated below is kept from surface waters - except only occasionally but including periodically water bearing surface waters. Violations may be punished by fines of up to 50 000 Euro. |
– |
5 m
|
| NW605-1 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water bearing surface waters - the product must be applied with equipment which is registered in the index of 'Loss Reducing Equipment' of 14 October 1993 ('Bundesanzeiger' [Federal Gazette] No 205, p. 9780) as amended. Depending on the drift reduction classes for the equipment stated below, the following buffer zones must be kept from surface waters. In addition to the minimum buffer zone from surface waters stipulated by state law, the ban on application in or in the immediate vicinity of waters must be observed at all times for drift reduction classes marked with "*". |
– |
– |
