| VA275 |
In order to protect uninvolved third parties (bystanders and residents), the product must be applied with loss reducing equipment which is registered in the index of 'Loss Reducing Equipment' of 14 October 1993 (Federal Gazette No 205, p. 9780) as amended, and is registered in at least drift reducing class 50%. |
– |
– |
| VA264 |
Application of the product onyl with trailing application techniques. |
– |
– |
| SS120-1 |
Protective gloves (plant protection) must be worn when handling/applying the product ready for application. |
– |
– |
| SF278-60OS |
During the first 60 days after application in fruit-tree crops and cane fruits, it must be ensured that the working time in treated crops is limited to a maximum of two hours per day. Long-sleeved working clothes, sturdy footwear and protective gloves must be worn. |
– |
– |
| SF276-EV |
For the period after application until the end of the vegetation period or end of crop management, it must be ensured that long-sleeved working clothes, sturdy footwear and protective gloves are worn during successive work/inspections with direct contact with the treated crops/areas. |
– |
– |
| NW606 |
The only case in which the product may be applied without loss reducing equipment is when at least the buffer zone stated below is kept from surface waters - except only occasionally but including periodically water bearing surface waters. Violations may be punished by fines of up to 50 000 Euro. |
– |
10 m
|
| NW605-1 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water bearing surface waters - the product must be applied with equipment which is registered in the index of 'Loss Reducing Equipment' of 14 October 1993 ('Bundesanzeiger' [Federal Gazette] No 205, p. 9780) as amended. Depending on the drift reduction classes for the equipment stated below, the following buffer zones must be kept from surface waters. In addition to the minimum buffer zone from surface waters stipulated by state law, the ban on application in or in the immediate vicinity of waters must be observed at all times for drift reduction classes marked with "*". |
– |
– |
| NG404 |
Between treated areas with an incline of more than 2% and surface water - except only occasionally but including periodically water-bearing surface water - there must be a border under complete plant cover. The border's protective function must not be impaired by the use of implements. It must be at least 20 m wide. This border is not necessary if: - sufficient catching systems are available for the water and soil transported by run-off, which do not flow into surface water or are not connected with the urban drainage system or - the product is used for mulch or direct drilling methods. |
– |
– |
