| WP747 |
Depending on the crop, cultivar and cultural method, damage cannot be excluded to the crop to be treated. Therefore, crop tolerance must be tested under typical working conditions before the product is used. |
– |
– |
| SF555-1 |
It must be ensured that the treated areas/crops may not be entered by uninvolved people for 1 day after application. This can be done, for example, by putting up appropriate warning signs prohibiting access to the treated area. |
– |
– |
| SF274-1 |
Successive work/inspections on/in treated areas/crops may not be carried out until 1 day after applying the product. While entering the treated areas/crops long work clothing, protective gloves and sturdy shoes must be worn. |
– |
– |
| VA271 |
When applying the product, a minimum buffer zone of 5 m must be kept to adjacent areas which are used by uninvolved third persons. Alternatively, driftreducing equipment which is registered in the index of 'Loss Reducing Equipment' of 14 October 1993 ("Bundesanzeiger" (Federal Gazette) No 205, p. 9780) as amended, and registered in at least drift-reducing class 50 % can be used for application. In this case, the minimum buffer zone for field crops
stated in the BVL publication in the Federal Gazette (No 2 of 27 April 2016, BAnz AT 20 May 2016 B5) must be observed. |
– |
– |
| NT103-1 |
In a strip at least 20 m wide which is adjacent to other areas, the product must be applied using loss reducing equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended, and be registered in at least drift reducing class 90 % (except agriculturally or horticulturally used areas, roads, paths and public places). Loss reducing equipment is not required if the product is applied with portable plant protection equipment or if adjacent areas (field boundaries, hedges, groups of woody plants) are less than 3 m wide or the product is applied in an area which has been declared by the Biologische Bundesanstalt in the "Index of regional proportions of ecotones" of 7 February 2002 (Federal Gazette no. 70 a of 13 April 2002), as amended, as agrarian landscape with a sufficient proportion of natural and semi-natural structures. |
– |
– |
| NW609-2 |
When applying the product on areas adjacent to surface waters - except only occasionally but including periodically water-bearing surface waters - the product must be applied observing the minimum buffer zone stated below. It is not necessary to observe this buffer zone if the product is applied using equipment which is registered in the index of 'Loss Reducing Equipment' of 10 September 2013 (Federal Gazette AT 23.10.2013 B4) as amended. Irrespective of this, in addition to the minimum buffer zone from surface waters stipulated by state law, the ban on application in or in the immediate vicinity of waters must be observed at all times. Violations may be punished by fines of up to 50 000 EUR. |
– |
5 m
|
