Data as of: 2026-08-05 Administration DE EN
Plant Protection Product Search

« Products

authorisation ends within 12 months: 2027-08-31

EVOLUTION

Authorisation number: 008660-00

Formulation
Emulsifiable concentrate
first authorised
2024-08-30
authorised until
2027-08-31
Field of activity
Herbicide
Hazard to bees
B4 – not hazardous to bees
Trial designation
AAP-10001-H-0-EC

Active substances

Active substanceEnglish name ContentBasis Type of substanceEU approved
Clethodim clethodim 140 g/L parent structure Wirkstoff yes
Quizalofop-P-ethyl quizalofop-P-ethyl 70 g/L parent structure Wirkstoff yes

The chemical group (such as guanidines) is not provided by the BVL interface and therefore cannot be shown.

Modes of action

Code Mode of action Text
WMH1 Mode of Action Group (HRAC/WSSA-Code): 1

The BVL records the mode of action as a WM-series condition; the group follows the FRAC, HRAC or IRAC classification.

Holder and distribution

Authorisation holder
Arysta LifeScience S.A.S (FR)
Distribution
Arysta LifeScience EAME (FR)

Authorised uses (8)

CropPest Area of use Hazard to bees Use no.
sugar beet volunteer cereals Outdoors 008660-00/00-001
sugar beet annual monocotyledonous weeds Outdoors 008660-00/00-002
sugar beet blackgrass Outdoors 008660-00/00-003
sugar beet quackgrass Outdoors 008660-00/00-004
winter oilseed rape volunteer cereals Outdoors 008660-00/00-005
winter oilseed rape annual monocotyledonous weeds Outdoors 008660-00/00-006
winter oilseed rape annual monocotyledonous weeds Outdoors 008660-00/00-007
winter oilseed rape quackgrass Outdoors 008660-00/00-008

Conditions of use

Code Text Crop Buffer zone
NW470 Where applicable, fluids left over from application, granules and their remains as well as cleansing and rinsing fluids must not be dumped in water. This also applies to indirect entry via the urban or agrarian drainage system and to rain-water and sewage canals.
SF275-VEAC For the period after application until shortly before harvest in field crops, it must be ensured that long-sleeved working clothes and sturdy footwear are worn during successive work/inspections with direct contact with the treated crops/areas.
SF284 While removing bolting beets manually, it must be ensured that long-sleeved working clothes, sturdy footwear and protective gloves are worn.
SS110-1 Protective gloves (plant protection) must be worn when handling the undiluted product.
SS2101 Wear a protective suit against pesticides and sturdy shoes (e.g. rubber boots) when handling the undiluted product.
SS530 Wear face protection when handling the undiluted product.
SS610 Wear a rubber apron when handling the undiluted product.
VA277 When applying the product, a minimum buffer zone of 5 m must be kept to adjacent areas which are used by uninvolved third persons. Driftreducing equipment which is registered in the index of 'Loss Reducing Equipment' of 14 October 1993 ("Bundesanzeiger" (Federal Gazette) No 205, p. 9780) as amended, and registered in at least drift-reducing class 50 % must be used for application.

Restrictions

Code Text Crop Buffer zone
EB001-2 SP 1: Do not contaminate water with the product or its container (Do not clean application equipment near surface water./Avoid contamination via drains from farmyards and roads).
NN2001 The product is classified as slightly harmful for populations of relevant beneficial insects.
NW262 The product is toxic for algae.
NW264 The product is toxic for fish and aquatic invertebrates.
NW265 The product is toxic for higher aquatic plants.
SB001 Avoid any unnecessary contact with the product. Misuse can lead to health damage.
SB005 If medical advice is needed, have product container or label at hand.
SB010 Keep out of children's reach.
SB111 Concerning the requirements for personal protective gear for handling the plant protection product the material safety data sheet and the instructions for use of the plant protection product as well as the guideline "Personal protective gear for handling plant protection prod-ucts" of the Federal Office of Consumer Protection and Food Safety (www.bvl.bund.de) must be observed.
SB121 The safety instructions and labelling regulations for user protection given in the instructions for use of each mixing partner must be observed.
SB166 Do not eat, drink or smoke when using this product.
SF245-02 It must be ensured that treated areas/crops may not be entered until the film of the plant protection product has dried.
SS206 Working clothes (if no specific protective suit is required) and sturdy footwear (e.g. rubber boots) must be worn when applying/handling plant protection products.
WMH1 Mode of Action Group (HRAC/WSSA-Code): 1
WH951 The risk of resistance has to be indicated on the package and in the instructions for use. Particularly measures for an appropriate risk management have to be declared.
WH952 The indication identifying the mode of action must be assigned directly to each corresponding name of the active substance as supplementary information on the packaging and in the instructions for use.

Notes

Hazard classification (GHS/CLP)

Signal word

Hazard pictograms

Hazard statements

Precautionary statements

Pack sizes

Further information

Data source: PSM-API · Data as of: 2026-08-05

Only the authorisation notice together with the product label and instructions for use is legally binding.