Data as of: 2026-08-05 Administration DE EN
Plant Protection Product Search

« Products

authorisation ends within 12 months: 2026-12-31

HYCOP

Authorisation number: 00A482-00

Formulation
Wettable powder
first authorised
2023-09-12
authorised until
2026-12-31
Field of activity
Fungicide
Hazard to bees
B1 – hazardous to bees
Trial designation
12463-91001-F-0-WP

Active substances

Active substanceEnglish name ContentBasis Type of substanceEU approved
Kupferhydroxid copper hydroxide 767.9 g/kg parent structure Wirkstoff yes

The chemical group (such as guanidines) is not provided by the BVL interface and therefore cannot be shown.

Modes of action

Code Mode of action Text
WMFM1 Mode of action (FRAC-Group): M1

The BVL records the mode of action as a WM-series condition; the group follows the FRAC, HRAC or IRAC classification.

Holder and distribution

Authorisation holder
Sharda Cropchem Espana S.L. (ES)
Distribution
Sharda Cropchem Espana S.L. (ES)

Authorised uses (3)

CropPest Area of use Hazard to bees Use no.
grape vine downy mildew of grapevine (Plasmopara viticola) Outdoors 00A482-00/00-001
pome fruit scab (Venturia spp.) Outdoors 00A482-00/00-005
pome fruit scab (Venturia spp.) Outdoors 00A482-00/00-006

Conditions of use

Code Text Crop Buffer zone
NT620-2 The maximum total application rate of 3000 g pure copper per hectare per year on the same area - even if combined with other plant protection products containing copper - shall not be exceeded (with the exception of 4000 g pure copper per hectare per year in hop cultivation and in viticulture).
NT621-1 Within a five-year period (including the current year and the preceding four calendar years), the sum of the total application rate of 17,500 g pure copper per hectare in viticulture shall not be exceeded .
NT622 In the years in which a total application rate of 3000 g pure copper per hectare is exceeded in viticulture, the competent authority of the country must be informed of the quantity effectively used and the exact size of the treated vine-growing area until 30 November of each year.
NT623 In viticulture, the total application rates per hectare per year, indicating the exact area shall be documented in a suitable form. The records shall be kept for a minimum period of five years.
NW470 Where applicable, fluids left over from application, granules and their remains as well as cleansing and rinsing fluids must not be dumped in water. This also applies to indirect entry via the urban or agrarian drainage system and to rain-water and sewage canals.
SE110 Wear tight fitting eye protection when handling the undiluted product.
SF275-EEOS For the period after application up to and including harvest in fruit-tree crops and cane fruits, it must be ensured that long-sleeved working clothes and sturdy footwear are worn during successive work/inspections with direct contact with the treated crops/areas.
SF275-EEWE For the period after application up to and including harvest in viticulture, it must be ensured that long-sleeved working clothes and sturdy footwear are worn during successive work/inspections with direct contact with the treated crops/areas.
SF276-21WE During the first 21 days after application in viticulture, it must be ensured that long-sleeved working clothes, sturdy footwear and protective gloves are worn during successive work/inspections with direct contact with the treated crops/areas.
SS110-1 Protective gloves (plant protection) must be worn when handling the undiluted product.
SS120-1 Protective gloves (plant protection) must be worn when handling/applying the product ready for application.
SS2101 Wear a protective suit against pesticides and sturdy shoes (e.g. rubber boots) when handling the undiluted product.
ST1102 Wear particle-filtering half mask FFP2 or half mask with particle filter P2 (identification colour: white) according to the BVL guideline "Personal protective equipment for handling plant protection products", current version, when handling the undiluted product.

Restrictions

Code Text Crop Buffer zone
EB001-2 SP 1: Do not contaminate water with the product or its container (Do not clean application equipment near surface water./Avoid contamination via drains from farmyards and roads).
NB6611 The product is classified as hazardous to bees (B1). It must not be used on plants which are in flower or which are visited by bees; this also applies to weeds. See Bee Protection Ordinance of 22 July 1992, BGBl. (Federal Law Gazette) I p. 1410. B1
NN3001 The product is classified as harmful for populations of relevant beneficial insects.
NN3002 The product is classified as harmful for populations of relevant predatory mites and spiders.
NW262 The product is toxic for algae.
NW264 The product is toxic for fish and aquatic invertebrates.
SB001 Avoid any unnecessary contact with the product. Misuse can lead to health damage.
SB005 If medical advice is needed, have product container or label at hand.
SB010 Keep out of children's reach.
SB111 Concerning the requirements for personal protective gear for handling the plant protection product the material safety data sheet and the instructions for use of the plant protection product as well as the guideline "Personal protective gear for handling plant protection prod-ucts" of the Federal Office of Consumer Protection and Food Safety (www.bvl.bund.de) must be observed.
SB166 Do not eat, drink or smoke when using this product.
SF245-02 It must be ensured that treated areas/crops may not be entered until the film of the plant protection product has dried.
SS206 Working clothes (if no specific protective suit is required) and sturdy footwear (e.g. rubber boots) must be worn when applying/handling plant protection products.
WMFM1 Mode of action (FRAC-Group): M1
NH621-2 In addition to the information on the type and amount of active substance, the content of pure copper in the product must be stated on the containers and retail packaging. This information must be stated directly below the directions for use under NT620-2.
WH952 The indication identifying the mode of action must be assigned directly to each corresponding name of the active substance as supplementary information on the packaging and in the instructions for use.

Hazard classification (GHS/CLP)

Signal word

Hazard pictograms

Hazard statements

Precautionary statements

Pack sizes

Further information

Data source: PSM-API · Data as of: 2026-08-05

Only the authorisation notice together with the product label and instructions for use is legally binding.